Category: Electronics (13 posts) [RSS]

Oct 14 2018

Porting LuaRTOS to the TTGO LoRa32 Board

How to port a real-time operating system to a new platform in order to get a highly versatile IoT platform

May 01 2018

Engrave things with a 3.5W Eleksmaker and LaserWeb

This article shows how to build and set up a 3.5W laser cutter for under 300 $.

Apr 01 2018

Add display fonts to custom built NodeMCU firmwares

This article shows how to add additional fonts to a custom built NodeMCU firmware which uses the u8g2 display driver

Mar 19 2018

Compile NodeMCU for WeMos Lolin ESP32 with OLED

How to build a custom NodeMCU firmware version for the Wemos Lolin ESP32 and how to display something from LUA

Feb 25 2018

Flash a hex file into an Arduino without IDE

How to flash GRBL1.1f hex file into an Arduino nono clone

Nov 07 2015

Automotive 2-channel PWM dimmer

This article describes how to build a 2-channel PWM dimmer for automotive applications. ...

Oct 19 2015

IPTV with a Synology DS713+

This article describes my approach to stream live TV across my local network with my Synology DS713+, a few USB receivers, Tvheadend and an Amazon FireTv Stick with Kodi as receiver ...

Dec 14 2014

Aviation Headset to USB Adapter

As a hobby pilot i bought myself a good aviation headset. Since it is very comfortable to wear i decided to connect it to my computer. This article describes how i built an adapter for this. ...

Dec 09 2014

Portable HAM radio station

As a HAM radio operator I spent a lot of time to design my station. It should be (at least somehow) portable and it should allow all band / all mode operation. In this article i want to share some thoughts about the hobby and about my station with you. ...

Sep 01 2014

Quick and dirty high-resolution webcam

Do you want to run a webcam ? ... Propably a cheap one with a high resolution ? -> here is the solution with a raspberry pi ...

Get Social

(c) 2019, by bytebang e.U. - Impressum - Datenschutz / Nutzungsbedingungen